Start to finish less than a couple hours. (with 2 crazy kids)
That's my kind of project!
I don't have a full step-by-step tutorial, but here's the basic idea to help you create your own.
1. Trace a t-shirt you already have onto an existing larger shirt.
Line-up the bottoms of the large and small shirts so you can use the hem that's already there.
I usually trace half of the body of the shirt and then fold it down the center to make sure both sides are even and match. (Make sure the back of the neck is left higher than the front.)
Trace the sleaves right on the existing sleaves, again using the existing hem.
Okay, so here's a little secret. I never actually trace the small shirt, I just lay it on top and start cutting around it. I know it's crazy, but it saves me couple minutes. It's not like I haven't made a few of these before :). If you don't want to be crazy and just start chopping your fabric to bits there are a couple other (safer) options. A. you can trace a pattern onto paper, cut it out, pin it on the large shirt and then cut.
B. Use a marker or fabric pen and trace directly onto the larger shirt. If you choose this option I would recommend turning the shirts inside-out just in case you make a mistake or two tracing.
2. Cut-out the pieces, adding 1/4 inch seam allowance.
Do NOT cut on the fold lines!
3. Sew the shirt together.
With right sides of the fabric together, sew the front to the back at the side-seams and shoulder seams. Sew the sleaves together at the under-arm seam. Then sew the sleaves in to the shirt, making sure the seams (under-arm and side) line-up.
4. Make the collar and sew it on.
First measure around the neck opening. (Let's pretend it's 18 inches).
Now cut a piece of rib-knit that is 2 1/2 inches wide by 2/3 the length of the neck opening. In this case that would be 12 inches. (Make sure the ribs in the fabric are running across the short way.) Sew the short ends of the rib-knit together making a circle. Now fold the strip in half so it is now 1 1/4 inches wide instead of
2 1/2 inches, and the seam is hidden inside. The fold is the top of the collar, and the raw edges attach to the shirt. Sew it on so the seam is on the inside of the shirt.
Bonus, if you're using an old t-shirt instead of a polo like I did, you can actually just take the existing collar right out of the old shirt and shorten it to kid's size rather than using rib-knit.
That's it! You have a shirt. I know it took a while to explain, but it really is easy.
One more hint... it helps to pre-shrink the rib knit. I didn't (because I was lazy) and the tan collar on the brown shirt totally shrunk!! Yah, not cool. He can still get it on, but see how tiny and bunched it is now? I'm going to have to take that off and try again. Guess it pays to do it right the first time.
Anyway... go dig through your husbands drawers. Get rid of something he really doesn't want to wear anymore and make something your kids will love. for free!
At the moment, it's, well, it's ugly. Dated, chipped paint, dirty. We don't use it much, unless walking on it to get to the yard counts. Or putting our shoes on before we come into the house. It has this trellis all around it that I think is revolting, BUT it does confer some privacy and has potential....
So, late at night when I'm up feeding baby girl, I've been scheming a bit. Wouldn't it be fun to make it nice? We have plans of painting the house and deck, so it will be improved no matter what, but maybe I'll go all-out and make it a living space? Make it somewhere where we want to hang out in the evenings after the kids go to bed, play with the kids and do art projects, or eat breakfast, lunch, and dinner all summer long?
Here's what I'm thinking:
Lots of plants, kind of a rustic feel with lots of reclaimed/re-purposed stuff. Cheerful colors yet also calming and a bit earthy. I've thought about adding some yellow or orange, but I think I probably won't.
Last fall I picked up a bunch of little summer dresses from the clearance rack for my little girl. $2 for a new dress? Yes, thank you. They are so cute and fun and colorful and will be perfect for summer. BUT, summer isn't here yet. Spring is (or should be, come on already!). And little summer dresses just aren't warm enough for the spring. They need a pair of cute leggings to go with!
However, buying leggings at full price to go with each dress makes for not such a great deal after all.
Fortunately I found something else on the clearance rack. T-Shirts! That's right. Not just any t-shirts either, bright, fun, extra large or extra-extra, or extra-extra-extra (you get the point) t-shirts for $1. Why is this so great? Because they're made out of knit! Nice stretchy wonderful knit! The bigger the shirt, the more fabric for your $. There is NO WAY I can buy that much knit at the fabric store for anywhere near that price!
Bonus, if I use the hem already on the shirt it saves me time sewing. So, better price, less time sewing.
Win win. Even better, use an old shirt you already have. Just make sure the fabric is still in good condition, not stretched out or worn thin. So, want to know how to make leggings from a t-shirt? I'll show you. It really is quite easy. A couple tips first.....
1- leggings need to stretch. Try to find a fabric with a good amount of stretch to it. Give it a tug, if it doesn't budge, use it for a t-shirt or skirt instead, but probably not leggings. I find that the best stretch is usually the women's shirts. Athletic shirts are often even stretchier.
2- direction matters. You might be tempted to turn your pattern pieces different directions to fit more on/get more out of your fabric, but don't. The stretch needs to go ACROSS the body, not up and down. This way the leggings stretch around.
Ok, here we go.
Start by using a pair of leggings you already have. Fold the leggings in half so you can see the front. Lay them on the shirt (or a paper if you want to trace a pattern) with the bottom of the leggings aligned with the bottom of the shirt.
Now trace 1/4 out from the inseam, all the way up to the waist band, up another 1 1/4 inches and across the top. (Hopefully the picture helps) Tip *make sure on the inseam you are tracing 1/4 inch from the SEAM not the edge. The back is a little bit larger and sometimes still shows a bit when the leggings are folded. Another Tip *notice on the waist-line how the front of the pants dips lower than the back. If you are tracing the front, follow the angle of the front and if tracing the back, follow the angle of the back.
Now flip the leggings over (you may want to re-fold them so the back shows this time) and trace again. Up the inseam, up to the waist band, up 1 1/4 inches more, and along the top (following the angle of the back). A couple tips here too... *remember how we could see the inseam on the front of the pants before, and I mentioned that the back was a little bit bigger? Well that seam is still wrapping around to the front a little bit, so when you trace the back of the leggings keep that in mind and add a little extra space along the inseam as you trace. (So it might be 1/2 inch from the edge instead of 1/4.)
When you're all done tracing you should have something that looks like this. (See how the back is a little bigger and the waist line goes up a little higher. Not totally critical since the knit is so stretchy, but the leggings will be that much nicer if you watch for those details!)
You're ready to cut! Cut through BOTH layers for fabric (the front and back of the shirt). This creates two mirror image pieces. DO NOT CUT ON THE FOLD LINE!!!
You're ready to sew!
1.Fold one piece in half, with the right sides together. Line-up the inseams, pin, and sew a 1/4 inch seam. (I like to zig-zag stitch near my seam too.) Repeat this step for both legs.
2. Turn one leg right-side-out and slip it inside the other leg. Now the right sides should be together. Match up the seams and pin.
3. Now sew along the 'U' shape with a 1/4 inch seam. (I usually do this twice to make it stronger.)
*Do NOT sew across the top! Just along the 'U' shape, see the blue line?
4. Using 3/4 inch elastic, make an elastic band. Just loop it in a circle overlapping the ends a bit, making sure not to get it twisted, and sew across the ends a few times. (Use the leggings you already have to determine the length of elastic you'll need.)
5.Put the elastic around the leggings 1 1/4 inches from the top. Make sure the leggings are inside-out!
6. Fold the top of the leggings over the elastic, pin in place, and stitch along the edge. If your elastic is a little bit narrower than the leggings just make sure the fabric is evenly distributed all the way around and give it a little bit of a stretch as you sew so everything is laying flat and you don't end-up with tucks or bubbles. Also, *you want the waist band to be able to STRETCH, so use a stretch stitch or double needle for this step!